Burst Pipe: Type of Water Pipe Tends To Burst

Polybutylene was very popular back then in ‘90s era. It is considered as a cheap option for plumbing which also offers great durability if you do not want to spend your money to buy copper. But it seems like it is not going to be that way anymore. The breakage and leak in the polybutylene pipe will happen, can cause the burst pipe and it is about the time after all.

According to the plumber expert, this pipe is unstable. After a class action lawsuit that was settled for USD 950 million against the manufacturers of polybutylene, builders never consider using this material again for plumbing pipes. The potential hazard along with the shifting foundation is too much to take.

Why are polybutylene pipes not good for your home?

Polybutylene itself is a material that easily prone to fractures. Over time, it could lead to serious plumbing issue and dramatic tragedy. When the installation is poor, the piping could fail right at its joints.

These incompatibilities will cause at least two consequences. If the leak of plumbing is left undetected, it could be a silent killer. It will grow mold on the wall because the water is seeping behind the drywall of your home. Besides, it also causes water damage. The next consequence is that you may find the burst pipe could be hard to recover from this instant catastrophe.

burst pipe

How to know if you have the polybutylene piping?

Buying a home is a big investment, even one of the biggest ones in your life. The faulty plumbing system is the last thing you want to expect from purchasing home. It could be uprooting your finance as well as your insurance. So, it is important to understand if your home’s piping system is including polybutylene or not, since it could hugely affect your home’s worth and also the future.

This type of pipe is available in various colors and it is installed in many locations. Commonly you will find the plumbing system inside the ground or sometimes on the home’s exterior around the water heater. The shape is curvy since it is pretty flexible.

But if you are not so sure then you can hire a professional to inspect your plumbing system.

What to do if polybutylene piping is in your home?

The best option if you find out this thing is replacing it as soon as you can. In Florida, a high concentration of chlorine is found in water every year. Chlorine will soon react with polybutylene pipe and fitting. It could cause flake, brittle, and scale. Over time, it will lead to fractures, which also decrease the integrity of the structure.

Replacing the pipe is the only best way you can do, even though it will be expensive. But if you do not replace it then you may expect fatal fail on the plumbing system. If you want inexpensive option then you can try PEX and PVC. Replacing all polybutylene pipes will reduce the risk of failure on your plumbing. Besides, the resale value of the house without polybutylene pipe is pretty great and stable.

To replace the pipes, you need the best assistance to help you. Call us for a professional plumber to help you replace your pipe into the most suitable pipes you need.

Tags :

Lead-free Solders for Drinking Water Plumbing Systems

The plumbing system is probably not your area. However, it is good to know the issues related to this matter. It is including how the government gives some regulations regarding the tools and equipment recommended for the plumbing system particularly the water supply. In 1986, the Safe Drinking Water Act Amendments published and enacted a new regulation to ban the use of lead-based solders. The type of solders can be used has been improved and now, there are the lead-free solders. To know more about the history, here is the explanation.

Why were the lead-base solders banned?

Before 1986, the soldiers that are widely used even for the drinking system are made from the tin-antimony and tin-silver. Unfortunately, these soldiers were considered giving some bad effects toward the pure water. Or in other words, it is so pollutant. It is based on the research conducted by the US Environmental Protection Agency. Although the contamination was basically quite tiny, it could spread faster than what they thought. The effects could not be seen instantly. However, it caused certain health problems for particular people with the low immune system after some periods of time. The soft and acidic water in the plumbing system can be more aggressive when it deals with the tools contained certain substances like tin antimony and tin-silver.

Water Plumbing System

What are the solutions to this problem?

Sure, it is basically not a simple thing. When it was known that the lead-based soldiers were one of the contamination reasons, the first thing to do by the government was trying to ban the utilization. It was not an easy thing for sure. Initially, there were some treatments given directly to the water. It was by changing the components of the water to make it non-aggressive. Unfortunately, it could not work in some cases. One of the reasons was that the plumbing system was the main factor why the water was reacted that way.

Next, it was no other choice anyway. The government was then moved to do solder selection. In term of efficiency, there are some reasons why certain solders are used. They are the easiness to use, service condition, and of course the cost. However, since it gave impact to the quality of water, there is one more consideration. There were some soldiers in which the utilization was banned in the plumbing system including the lead-base solders that were really common to be used.

The Use of Free-Lead Solders

Passing through many observations and research, there must be certain solders for the plumbing system particularly the one dealing with the water supply. Here are then the free-lead solders. At the first time this idea was mentioned, people were doubtful whether it could work well or not. Despite it was considered as weaker, the costs needed to spend were also high. However, thanks to the development of technology which is so rapid. In this 2018, it is easier for us and the plumbing system to use this type of solders. The quality is also getting more and more improved as well.

 

Tags :

Water and Energy Saving Plumbing Fixtures: All You Need to Know

The high cost of water and energy saving makes the cost of the building also increases. This makes people think hard to find ways to suppress the cost so their building projects become more efficient. Water and energy saving fixtures are chosen to efficiently lower the building budget. This is the latest design of eco-friendly fixtures that has more benefits if compared to the older ones.

The Benefits of Using Water Saving Plumbing Fixtures

Unlike the older designs of fixtures that available in the market now, the water and energy saving plumbing fixtures offer a lot of benefits for users. The fixtures make it possible for the device to use less water for building purposes. Water efficiency plumbing fixtures are consisted of some devices such as low consumption of shower heads, high – efficiency urinals, dual – flush valve toilets, high – efficiency toilets and waterless urinals.

  1. Shower Head with Low Consumption

If compared to the older designs of the fixtures, this latest design allows you to use a shower head with low consumption of water. By using the device you can save 20% up to 40% of water since it is set to be sufficient with only 1.5 up to 2.0 gallons of water every minute.

  1. High – Efficiency Urinals

High – efficiency urinals system used in the water and energy saving plumbing fixtures make it possible for you to use only 0.5 gallons per flush. It is much safer if compared to the older designs that commonly need about 1.0 gallons of water each time you flush.

  1. Dual – Flush Valve Toilets

The next product is dual – flush valve toilets which have the capability to save water up to 38%. The system used in the device also enables the users to use a low or high volume of water to flush either liquid or solid waste.

  1. High-Efficiency Toilets (HET)

High-Efficiency Toilets or mostly called as HET allows the users to save up to 20% of water per flush if compared to the older designs of closets. Replacing your old toilets with HET will also help you to save up to 60% in water usage.

  1. Waterless Urinals

The water saving plumbing fixtures also come with some waterless urinal models. This kind of device will allow you to lower the consumption of water.

plumbing fixtures

Energy Saving Plumbing Fixtures

The plumbing fixtures are also available for energy saving purposes. Some of the devices include:

  1. Turbine – Powered  Faucets

The devices make it possible for the water flow to spin a specific turbine placed inside the faucets. This will produce and store the power for the sensor to work automatically. The batteries used a function as a backup system and can work up to 19 years.

  1. Solar – Powered Faucets

The system used in solar – powered faucets allow the devices to take energy from any source both artificial and natural lights. The devices will use the energy to fill the batteries of the faucets. This really saves the energy usage and lowering the frequency to replace the batteries used for the faucets.

Call us to get free job estimates and help you to install the energy-saving plumbing fixtures soon!

 

Tags :

Why Water Heaters Burst?

water heater burst

When water heater leak or overflows, extensive damage to your home can be expected. But, when a water heater bursts, then the damage and the danger heightens immensely. Aside from the hot water being absorbed by the floors, walls, and boards that can lead to swelling and eventually rot and decay, a bursting water heater can cause serious burns if it touches your skin. What are the reasons that can lead to an exploding water heater?

Common Reasons

Luckily, there are only a few common reasons why water heaters may burst unintentionally. Here are what you should be aware of.

Buildup of sediment – this is the number one possible cause of a water heater explosion. The minerals from hard water will result in the accumulation of sediment over time. These will eventually settle at the bottom of the storage tank where it will create and insulating layer. This will force the water heater’s burner to run longer than usual resulting in the deterioration of the tank aside from possible overheating.

An indication of this problem is a bubbling, popping, or knocking noise coming from the storage tank of the water heater. The noise is the result of the boiling water that is trapped underneath the sediment layer.

The only way to prevent the buildup of sediment inside the storage tank is to make sure that you regularly flush and drain the water heater at least once a year.

Rust and corrosion in the tank – Steel, which is mostly iron, is the usual material used for the manufacture of water heater storage tanks. This means that there is a high probability that after a few years of operation, the storage tank will eventually succumb to corrosion and rust.

This is despite the presence of an anode rod that is designed as an internal rust protection system for the water heater. The anode rod is about 3 to 5 feet long and rests inside the tank to attract rust. This is why it is often referred to as a sacrificial anode, which must be replaced regularly. If the hot water coming out of your faucet or shower is brownish in color, then you may have rust in your storage tank.

You can prevent this from happening by inspecting the sacrificial rod at least once every 2 years and change in in about 4 to 5 years of operation. If you are using a water softener, you may need to change the sacrificial rod earlier.

Excessive internal pressure – it is inevitable that pressure will build up inside the storage tank. This is normal because water will expand as it is heated and will exert pressure on the walls of the storage tank. The dangerous thing is when this internal pressure becomes too high and allowed to continue to rise.

With water heaters, this is usually prevented by the temperature and pressure relief valve. The valve opens up to ease the pressure. The valve however will eventually wear down due to age. You will know that you have an internal pressure problem when the temperature and pressure relief valve keeps on opening or leaking.

One way to prevent this from happening is to make sure that the thermostat is set to 120 up to 125 degrees only. Anything higher than this will not only increase the internal pressure dangerously, but also puts you in danger of scalding. Inspect the temperature and pressure relief valve at least twice a year to make sure that it is in working condition.

The threat of water damage is further heightened when you consider that when a water heater bursts, it does not shut off automatically. This means that the heating element will continue to burn. And without anyone there to shut it off, you are facing a worst case scenario of exposed flames left unattended.

Call a licensed plumbing professional to give you water heater a thorough checkup to avoid a burst water heater condition.

Tips on How Water Heater Cleaning

Doing hot water heater cleaning is not that hard to do. But this could save you from a lot of expense. When you fail to clean this heating unit, problems in the water heater could be frequent. All you need are the right tools and some information on the methods for cleaning.

Things you need for Hot water heater cleaning:

  • Brush
  • Garden hose
  • Pair of pliers or wrench
  • Teflon tape

Experts suggest that you clean your water tank at least once a year and to do water heater for every 2 months. This is necessary to prevent build-up of any of these:

  • Calcium deposits
  • Sediments
  • Rust
  • bacteria

Steps for Water Heater Cleaning

The first thing that you need to do is drain the tank. Next is to remove the drain valve. Use a long brush in order to clean the inside of your drain valve. The size of the brush should be large enough to fit into the drain opening.

Since the bottom of the tank is just below this opening, cleaning from this part is a good idea. Scrub the bottom of the tank using this long brush. Do the cleaning in a side to side manner and front and back. Your goal is to loosen up any build-up.

After a couple of times doing the cleaning, reinstall the drain valve. See to it that you cover this with a Teflon tape so that you will not experience any leak.

Attach a garden hose to the opening of the drain valve. Then, turn on the water supply to your water heater. Let the water run going to the tank and from the tank, the water will is directly drained. Let the water flow for about 1 minute.

Let all water drain first from the tank. After the draining is complete, you could repeat the whole process until you see that clear water is coming out from your tank.

It is ideal to connect the garden hose to a bucket so that you will be able to see if the water is clear. On you first draining, you will surely see how dirty the water is from the tank.

What you get with water heater cleaning:

  • more efficient heating unit
  • clearer hot water
  • water is heated faster
  • supply of hot water is better

Aside from cleaning, it is also important that water heater repair should be done by professional plumbers. Do not let a single problem left unfixed for a long period of time for it could have some bad effect on the overall condition of your heating system.

If ever you don’t have the time to do the cleaning, you could always call the experts for help instead of simply letting your tank go on for years without cleaning. Call Riverside Plumbing. We could help you.

Tags :

Ways on How to do Water Leak Detection on Your Own

One thing is for sure, a leak means expense. If the leak is serious, you will surely face higher expense. You will just be surprise one day on the sudden and unexplained surge in your water bill. With this, it is very important for homeowners to know some methods on water leak detection.

As soon as you suspect that there are leaks in your plumbing, immediately proceed to a thorough investigation. If you think that the leak is under your concrete flooring or buried in your yard, it is best to leave the job to the experts.

Below are tips on how you are going to determine if there are leaks in your home. Knowing these is better than knowing nothing at all.

Find your water meter

The first place that you need to visit when you need to check your plumbing for leak is the water meter. All you have to do is examine your dial. This dial will move when you use water inside you home. So when you turn off everything that uses water in your house, expect that the dial would not move, if you see that it is still moving, it is a sign that there is leak.

When you have detected that there is a leak, good job. There are a lot of homeowners who suffered from expensive damages due to undetected leaks. The main reason is they have no idea with simple water leak detection methods.

Searching for the leak

The best thing that you can do is to check first your toilet for leak. The most common leak is found on the toilet water tank. Check if water is not continuously flowing into the bowl for it could mean a lot of wasted water. If ever you find a leak there, all you have to do is to replace the flapper which is responsible for stopping water on the water tank from going into the bowl.

Next is to check all visible pipes inside and outside your home. See to it that you don’t miss any pipes. Also, you need to inspect all water fixtures and appliances in your home. Make sure that these parts of your plumbing do not have any leaks or damages for it could be the reason why water is wasted.

Look closely into your yard. Is there a part that is different from the rest? If you see an area where the grasses are greener and greater in number, it might mean that a leak is directly below the ground. You could check if the soil on this area is moist. If it is and the other areas are dry, it is definitely a leak.

For leaks that are found below your house, it is best that water leak detection and repair is done by a professional plumber. We at Riverside Plumbing could help. Our plumbers are trained well when it comes to dealing with leaks efficiently and fast.

Tags :

Importance of a Clean Grease Trap

It is very important that you know how to clean the grease trap yourself. If you always rely on professional service for cleaning, it would certainly be expensive on your part. Cleaning grease trap might not be that easily, but it is rewarding.

Fat, great and oil could clog not only septic tanks but grease traps as well. As time goes by, there will be a major build-up in your grease trap so ensure that you check it regularly and clean it if needed. Failure to do so could lead to major problems such as:

  • Manhole overflows
  • Sewage spills
  • Environmental problems
  • Property damage
  • Health hazard

To make sure that your property is safe and away from common plumbing issues, better have your grease trap cleaned in a regular basis. There are now a lot of guides that you could find online to help you do this.

Even though your home does not produce many grease and oil, there is a chance that it could accumulate in time in your trap. It could not only result to damages in the device but also could result to different health hazards.

Dangerous Wastes in Grease Trap

  • Mold
  • Spoiled food
  • Bacteria
  • Other kitchen wastes

If the waste trap is not properly cleaned or treated, it would certainly cause a major problem in time. Since you are the one who could personally check this part of your plumbing, see to it that you remind yourself of its regular cleaning.

More Issues with unclean Grease Trap

The unwanted odor in your grease trap could affect the air quality in your home. The untreated waste in the trap could emit some particles that could go to the air-conditioning system.

Also, this waste could attract pests such as roaches and rats. Since you don’t want these pests to constantly roam in your place, see to it that you waste trap is clean.

The purpose of this grease trap is to ensure that oil and grease do not reach the drain. So if ever you still don’t have this in your home, now is the right time to think about its installation.

It would be a big problem if grease would reach your drains. Once clogging would happen, it could result to a lot of expense on your part.

Grease Trap Cleaning

It is good to know that there are now a lot of products available in the market that could help you effectively clean grease trap. These products could deal with the bacteria effectively.

Make sure that you also clean the interceptors thoroughly. This has to be done by a reliable plumber so that the cleaning is done according to the standard.

You certainly do not want to experience all the frustrating effects of unclean grease traps. Riverside Plumbing could help. It would certainly be our pleasure to help you in making sure that your waste in trap is properly eliminated and that it would work efficiently.

Tags :

Know More about Trenchless Sewer Repair Service

Problems in the sewer lines could become messy when not handled immediately. It could also cause a lot of inconvenience at home. When such problems occur, immediately seek trenchless sewer repair service offered by professional plumbers. It would be best that the new method of dealing with sewer line problems is utilized. With this, you would not see a lot of digging in your yard.

The New way of doing the repair

Before, when a problem occurs in the drain lines and it needs fixing, you could certainly see a lot of digging. The new way of doing it requires less digging and this is known as trenchless sewer repair. It is a non-destructive method to deal with issues in your drain lines. This method becomes easier with the access holes in the sewer lines.

If such holes are not available, some digging would be done but it’s only to serve as access holes. It would also serve as permanent access holes which are useful if ever another problem is experienced by your drain lines in the future.

Cost of the Repair

Some thinks that this new method is expensive since it uses latest technology. It is true that the cost of the service is high but at least you don’t have to deal with the damages in your property. One of the reasons why traditional drain cleaning is expensive is due to the accumulated damages in your property especially if you have done some concrete designs in your yard. With the trenchless method, there would be less damage in your property making it more cost effective.

With the new trenchless method, you only have to deal with the cost of the service. You don’t need to think about any damages in your property. There are now a lot of homeowners who prefer this method.

Advantages of Trenchless Pipe Repair

  • Repair is a lot quicker – Since there is no digging, the method is faster compared to the traditional one. With fewer diggings, you could expect less change in your property. Plumbers could easily get to the point of dealing with any issues in your drain lines.
  • No interruption – With this option, you could still enjoy the convenience of using water in your home while the plumbers do their job in your drain lines. It is definitely very convenient to everyone in the house.
  • Stronger pipes – In the replacement for old pipes, you could be sure that the new pipes are of good quality which also depends on how much you are willing to invest.  Since the quality of the new pipes is good, you surely don’t have to worry about any problems in your drain for a long time.

With the many benefits of this new method of dealing with drain line problems, you might now be thinking about considering it when necessary. If you need this kind of service, consider Riverside Plumbing. We would certainly be ready for this kind of job.

Tags :

Why Choose a Tankless Water Heater for Your Home

A water heater system is a very important part of your plumbing system at home. This provides a lot of convenience due to the many uses of hot water like in cooking, bathing and cleaning. If you still don’t have this water heater system at home or is planning to make a replacement, go for tankless water heater.

How Does a Tankless Water Heater Work?

To be convinced that tankless water heater is the best option, you need to know first how it works. There are two sources that fuel this water heater – Gas or Electricity. In a gas unit, a burner is used to heat the water. This burner is ignited when the unit senses a water flow which means that there is a need for hot water.

In a water heater powered by electricity, a flow switch is activated when there is flow in water. The voltage needed to heat the element is provided by the system control. Water heater fueled by electricity is quite simple to install.

In a tanktype water heater, all the water in the unit has to be heated us to provide continuous supply of hot water. This also means that it could either provide an average hot water or not enough hot water to your home.

With a tankless unit, the water is only heated when needed which means that it is more energy efficient. It is said to help you save about 40% on your energy bills compared to using the traditional water heater.

How to Choose a Tankless Water Heater

Today, there are now a lot of types of tankless water heater and these vary in shapes, sizes, models and features. Even though it is good to know that you have a lot of options, it also made selecting the right tankless unit a more challenging task. You need to know some few things in order to make the right choice.

  • Fuel: Natural Gas or Electricity
  • Location : Indoor or Outdoor
  • Number of plumbing fixtures at home
  • Demand of the family

One of the fears of homeowners is purchasing a water heater that is too large for the need of the family. It means overpaying for the unit. It is also not a good experience to purchase a small unit that could not meet the demand of the family for hot water.

With this, you need to let an expert plumber do an inspection in your home to determine the right size of the unit. The expertise of the professional plumber could certainly help you a lot.

For this reason, it is ideal that you know a dependable and reliable plumbing contractor in your place. If you live in the city of Riverside, we would be glad to do the job for you. We at Riverside Plumbing are always ready to help you in anything that has something to do with your plumbing which includes services for tankless water heaters.

Tags :

Things to Remember in Drain Cleaning

In order to keep plumbing system at home in good condition, some maintenance is needed like drain cleaning. A lot of people today neglect this cleaning that is why they suffer a lot of inconvenience and unnecessary expense. Below are some steps that you could do when drain cleaning is needed. If these steps do not work anymore, do not delay in calling the experts.

Prepare Everything before Cleaning

Before you start drain cleaning, it is necessary that everything needed is prepared first. It would be a big work if you keep on looking for things when the need arise. Everything should be near and reachable.

Here are the things you need:

  • Trash can or any container where wastes could be thrown
  • Old towel
  • Gloves
  • Plumbing snake

Since anything could be in your drain and it’s a combination of things that could come from the bathroom and sink, things could really be unpleasing. You need to prepare yourself in seeing buildup of wastes. There is no other way than manually getting this buildup out of your drain using your hand. This is why you need to use gloves.

There is always a possibility that you could get dirty. With this, you need to use an old towel to wipe the dirt in your body. There are clogs that you could easily reach but expect that there are some which is beyond your reach. Try using a plumbing snake which is available in the market. This could help you a lot.

Cleaning your Drains

First, you need to remove the cover of the drain that you want to check and remove clog if there is any. Most likely, it would be hard for you to see what is inside since it is dark. Try to reach for anything that is inside it. Be extra careful since anything could be there. Carefully remove any buildup or anything that causes the blockage.

You have no other option than to use your own hands to reach for those blockages. Often times, you would see a combination of things that you drain in your sink and bathroom. These could really be yucky so you have to be prepared.

Seek Professional Help

If the things above do not solve your problems in the drain, the best thing that you could do now is to seek the help of the experts. However, most of the time, simple drain problems are handled with the use of the steps provided in this article.

Your knowledge in doing simple steps for drain cleaning could really help a lot. When it’s time for the experts to do their work, do not worry that much since there are now a lot of plumbing services like drain cleaning which are offered in an affordable price. We at Riverside Plumbing offer affordable service while maintaining high quality in our service.

Tags : , ,

Testimonial

We never know when we’ll experience emergency plumbing and I did not see them coming, too. I was surprised to find leaks all over my place that caused my kitchen and bathroom to flood. I thank the people from this company that came to my door and helped me fix the leaking faucets right away. If not for their help, my family and I could have suffered longer. I’d definitely hire this plumbing company again.
- Tim, Riverside

My old pipes caused a burst and the leaks were everywhere. I call Riversideplumbing in the morning, and everything has done in the afternoon. Now I know where to go if my plumbing get issues again.
- Ashley, Riverside

Recommended plumber! They are fast response and licensed. I can't find the other plumber as good as Riversideplumbing!
- Martha, Riverside
Call us now